Sharp MD-M3H User Manual

■

Before connecting external units, set this unit to the stand-by mode and turn off the power to the external
units.
Connecting to stereos or MD/CD players (equipment which can output analogue signals)

The other MD/CD player

Commercially available lead
with 3.5 mm (1/8") stereo
mini-plug and RCA plugs

T o   t h e   o u t p u t   /
headphone socket

RIGHT

LEFT

To the analogue 
output sockets

LEFT

RIGHT

RIGHT

LEFT

●

Red plug 

→

 To RIGHT

●

White plug 

→

 To LEFT

Commercially available RCA lead

●

 

When the audio output signal of an external unit is connected to this unit, oscillation may occur.
In such a case, disconnect either the input or output connection.

■

●

Before plugging in or unplugging the headphones, make sure the volume level is reduced.

●

Be sure your headphones have a 3.5mm (1/8˝) diameter plug and are between 16 ohms and 50
ohms /impedance. The recommended impedance is 32 ohms.

●

When headphones are connected, the speakers are disabled automatically.
Adjust the VOLUME control for the desired volume.