Filmtech Film-Tech P-SERIES FILM TRANSPORT P3550 User Manual

5

Shown below is a diagram of the P3350 Platter, indicating most major
components and controls. Further technical explanations of these components
and systems are elsewhere in this manual.

1. Platter Deck (3): 52" aluminum deck

2. Take-Up Ring (2): Ring around which film is wound during take-up
    Pay-Out Head: Assembly that locates in the center of the film, controls deck speed during pay-out, and

aligns film to the rollers on the main mast

3. Speed Control Assembly (3): Part of main mast, controls individual deck speed and function

4. Deck Drive Motor (3): DC motor, located under the decks

5. Take-Up Entry Roll er Assembly:  Guides film from projector to proper deck control assembly

6. Pay-Out Exit Roller as sembly: Guides film from tension sensor to projector

7. Pay-Out film Rollers (opposite side): guides film to tension sensor and detects film speed

8. Motor Engage Lever (3) (opp. side): Engages and disengages drive motors from decks

9. Work Lights: For bottom two decks, illuminates deck area

10. Tension Sensor: Detects fatal  Brain  wraps, and shuts down platter and console

11. Power Plate Switches and Indicators: Main On/Off Switch and Fuse, Tension Alarm light and Beeper.

12. A.C. Input Module: AC input cord location

13. Leveling Feet (4): for leveling platter on uneven surfaces.