Epson MovieMate 25 User Manual
14
Press .
To resume playback,
press .
1
Remove the disc from the disc tray.
2
Press .
If the lamp was on, the lamp turns off and the
Image Off light flashes orange (during cool-
down).
“Now Cooling” appears in the display window
above the DVD tray.
The confirmation buzzer beeps twice to indicate
that cool-down has completed.
3
Turn off the main power switch.
If you only press
to turn off the power,
MovieMate continues using electricity.
4
Replace the lens cover.
Keep the lens cover in place when the projector is
not being used to protect the lens from dirt and
damage.
Things to note when using resume
• Even if you press
to turn off the power, play-
back resumes when you press
.
• Resume cannot be used in the following
situations.
- The disc is removed from the disc tray.
- After pressing
to turn off the power and
pressing
to turn the power back on.
-
is pressed twice.
- If the main power switch is turned off.
• Resume cannot be used during program playback
or random playback.
• The position from which playback resumes may
be slightly different from where it was stopped.
• The audio language, subtitle language, and angle
settings are memorized along with the stopping
position.
• It is possible that resume cannot be used if the
disc is stopped when the disc menu is displayed.
Stopping playback
The Image Off light flashes orange to indicate
that the internal lamp cooling function (cool-
down) is taking place. The buttons on the remote
control and the main unit are disabled when
cool-down is taking place (approximately 9
seconds).
Do not turn off the power or unplug the unit during cool-
down as this may reduce the lifespan of the lamp.
Turning off the power