Oregon Scientific WeatherBox BAR383HG User Manual

EN

6

The reception icon will blink when it is searching for a 
signal. If the radio signal is weak, it can take up to 24 
hours to get a valid signal reception.

To force the sensor to search for clock signals:

•

  Press  and  hold  SEARCH  on  the  sensor  for  2 

seconds.

Clock area reception indicator:
ICON  

 

Connection between main unit and

 

sensor collecting signals

 

Sensor signal reception

 

Main unit has contacted sensor; time

 

is synchronised

 

Main unit has contacted sensor; time

 

is not synchronised

 

Main unit has lost contact with sensor;

 

time is synchronised

 

Main unit has lost contact with sensor;

 

time is not synchronised

 

Main unit cannot contact sensor

No icon   Clock reception disabled

To toggle clock reception ON/OFF:

1.  Press  MODE  /  SNOOZE  to  select  Clock  display 

area.   appears to indicate the area selected.

2.  Press and hold SEARCH SENSOR/ RF CLOCK for 

two seconds to enable / disable clock reception.

To  force  the  clock  to  search  for  the  sensor  and 
retrieve clock signals:
1.  Press MODE / SNOOZE to navigate to the Weather 

display area.

2.  Press  and  hold  MEMORY  / 

  ON  /  OFF  for  2 

seconds.

 

Main unit searching for

 

sensor

 

Sensor channel has been

 

found

 

The sensor cannot be

 

found.

NOTE  If the sensor is still not found, check the batteries, 
obstructions and remote unit location.

Rotate  MODE  /  SNOOZE  when  clock  display  area  is 
selected to choose between the following display modes:

•

  Clock with seconds

•

  Clock with weekday

•

  Calendar with weekday

•

  Time offset clock with weekday

•

  Alarm

BAR383HG_M_EN_R9.indd   6

4/12/06   5:24:14 PM