IDEAL INDUSTRIES IZGS 68 ICTX User Manual
15
The appliance is designed to be
connected to 230 V monophase
electricity supply.
electricity supply.
The connection must be carried out
in compliance with the laws and
regulations in force.
regulations in force.
Before the appliance is connected:
1) check that the main fuse and the
1) check that the main fuse and the
domestic installation can support the
load (see the rating label);
load (see the rating label);
2) check that the power supply is
properly earthed in compliance with the
current rules;
current rules;
3) check the socket or the double
pole switch used for the electrical
connection can be easily reached with
the appliance built in the forniture unit.
connection can be easily reached with
the appliance built in the forniture unit.
The appliance is supplied with a
connection cable and the relevant plug.
The plug has to be fitted in a proper
socket.
If connecting the appliance directly to
the electric system, it is necessary that
you install a double pole switch between
the appliance and the electricity supply,
with a minimum gap of 3 mm. between
the switch contacts and of a type suitable
for the required load in compliance with
the current rules.
you install a double pole switch between
the appliance and the electricity supply,
with a minimum gap of 3 mm. between
the switch contacts and of a type suitable
for the required load in compliance with
the current rules.
The connection cable has to be placed
in order that, in each part, it cannot reach
a temperature higher than 90°C.
a temperature higher than 90°C.
The brown coloured phase cable
(fitted in the terminal block contact
marked with "L") must always be
connected to the network phase.
marked with "L") must always be
connected to the network phase.
Electrical Connection