BENDIX TCH-022-001 Leaflet

 Bulletin

Subject:

 

Through field reports and customer inquiries, we have been made aware of a developing
pattern of brake noise on Ford vehicles equipped with the 15”x4” Bendix “S-Cam”
foundation brake.  The lining Ford specifies as standard original equipment is Carlisle
E145A.  This medium friction, non-asbestos lining was chosen by Ford based on tests
they conducted, which indicated good performance and wear, when used in most types
of service conditions.

Under some conditions however, the lining and parts of the brake resonate or vibrate,
which produces noise.  The brake drums, in this instance, act like a speaker and radiate
the noise.

Working in concert with Ford, Bendix has developed a reline kit that will eliminate the
undesirable noise in those types of service where it occurs.  The kit, 108318, is a
combination lining set and contains the material necessary to reline one axle (four brake
shoes).  There are four (4) pieces each of two (2) different type brake blocks contained
in the kit. One piece of each type brake block is installed on a single shoe.

Beyond being irritating, the noise may also damage the foundation brake shoe retainer
springs if there is sufficient exposure.  For this reason, the shoe springs must be
replaced when the vehicle brakes are relined to eliminate noise.

The Bendix combination lining kit along with the appropriate shoe spring kit is listed
below.  The part number for a Bendix unlined 15”x4” shoe is also shown for
convenience, should a show replacement be desirable.

Combination Lining Kit

Spring Kit

15”x4” Unlined Shoe

15”x4” brake

108318

106845

2259428