HP OpenView Storage Data Protector B6960-96008 User Manual
Integrating SAP R/3 and Data Protector
Troubleshooting
Chapter 2
235
Util_File_Online SAP backup fails with “semop() error”
Problem
When the
util_file_online
option is used with BRBACKUP (for
example, if you select the
Brbackup_Util_File_Online
template), the
tablespaces are switched into/from backup mode individually. As there
can be only one process communicating with BRBACKUP, several
sapback processes are using a semaphore to synchronize their
interaction with BRBACKUP.
can be only one process communicating with BRBACKUP, several
sapback processes are using a semaphore to synchronize their
interaction with BRBACKUP.
The number of sapback processes is calculated as the sum of
concurrencies of all devices used for backup. With a large number of
sapback processes, the maximum number of processes that can have
undo operations pending on any given IPC semaphore on the system may
be exceeded. In such case, several sapback agents will fail with the
following error:
concurrencies of all devices used for backup. With a large number of
sapback processes, the maximum number of processes that can have
undo operations pending on any given IPC semaphore on the system may
be exceeded. In such case, several sapback agents will fail with the
following error:
[28] No space left on device.
Action
Perform any of the following actions to resolve the problem:
• Reduce the number of backup devices or their concurrency.
• Increase the value of the
semmnu
kernel parameter. After you increase
the value, rebuild the kernel and reboot the system.
Restore Problems
At this stage, you should have performed all the verification steps
described in the previous sections. After this, proceed as follows:
described in the previous sections. After this, proceed as follows:
1. Verify a user for the restore:
Verify that user specified for the restore session is the user of backup
session and that he/she belongs to the Data Protector
session and that he/she belongs to the Data Protector
operator
or
admin
group.
2. Verify that a backup object exists on the backup media and in
the IDB:
This can be done by executing the command
/opt/omni/bin/omnidb -SAP "<object_name>" -session
"<Session_ID>" -media
(HP-UX and Solaris systems) or
/usr/omni/bin/omnidb -SAP "<object_name>" -session