Manualsbrain.com
  1. Manuals
  2. Brands
  3. Hometech
  4. 8-Port Voice Module SAM-V8M
  5. User Manual

Hometech 8-Port Voice Module SAM-V8M User Manual

Download
Page of 8
2.  Module Installation 
 
Mounting: 
Align the mounting pins with the grid holes on the back of the enclosure.  With the 
mounting pin plungers in the “out” position, press the unit into the grid in the desired 
location, secure by pushing the plungers in. 
 
Terminate Incoming Service Lines: 
Run twisted pair cable from the telephone company demarcation point to the 110 IDC 
labeled “LINE IN” on the SAM-V8M.  
 
110 IDC Termination Procedure 
Strip 3 in. of outer jacket from the cable.  Place wires into proper slots according to 
selected configuration.  Starting at the blue-position of the IDC, begin with the white 
wire of each pair as you progress to the orange-position on the IDC as shown 
below.  Press wires into slots with punch tool.  Trim excess wire with diagonal 
cutter. 
 
Brown 
White/Brown 
Green 
White/Green 
Orange 
White/Orange 
Blue 
White/Blue 
 
NOTE: one pair of wires corresponds to 
each line from the phone company.  (Line 
1=blue, Line 2=orange, Line 3=green, 
Line 4=brown).