Bernina 350 PE Owner's Manual

When using an electrical appliance, basic safety 

precautions should always be followed, including 

the following:

Read all instructions before using this sewing 

computer. 

To reduce the risk of electrical shock:

1.  The sewing computer should never be left 

unattended when plugged in.

2.  Always unplug the sewing computer from the 

electrical outlet immediately after using and 

before cleaning.

3.  LED radiation. Do not view directly with 

optical instruments. LED class 1M

To reduce the risk of burns, fire, electric shock or 

injury to persons:

1.  Use the sewing computer only for purposes 

as described in this manual. Use only 

attachments/accessory recommended by the 

manufacturer as contained in this manual.

2.  Do not allow the sewing computer to be 

used as a toy. Close attention is necessary 

when this sewing computer is used by or 

near children and infirm persons. This 

sewing computer is not intended for use by 

persons (including children) with reduced 

physical, sensory or mental capabilities, or 

lack of experience and knowledge, unless 

they have been given supervision or 

instruction concerning use of the sewing 

computer by a person responsible for their 

safety. Children must be kept under 

supervision to ensure that they do not play 

with the sewing computer.

3.  Never operate this sewing computer if:

it has a damaged cord or plug

it is not working properly

it has been dropped or damaged

it has fallen into water

Take the sewing computer to the nearest 

authorized BERNINA dealer for examination, 

repair, electrical or mechanical adjustment.

4.  Never operate the sewing computer with any 

air vents blocked. Keep ventilation openings 

of the sewing computer free from lint, dust 

and/or fabric bits.

5.  Keep fingers away from all moving parts. 

Special care is required in the needle area of 

the sewing computer.

6.  Never drop or insert any objects into any 

opening on the sewing computer. 

7.  Do not use the sewing computer outdoors.

8.  Do not operate the sewing computer where 

aerosol products (spray) or oxygen is being 

administered.

9.  Do not pull or push the fabric while stitching. 

This may deflect the needle, causing it to 

break.

10. Do not use bent needles.

11. Always use the BERNINA original stitch 

plate. The wrong stitch plate can cause 

needle breakage.

12. To disconnect, turn power switch to «0» (off), 

then remove the plug from the outlet. Do not 

unplug by pulling the cord, instead grasp the 

plug to pull it from the outlet.

13. Turn power switch to «0» (off) when making 

any adjustments in the needle area, such as 

changing the needle or the presser foot, etc.

14. Always unplug the sewing computer from the 

electrical outlet when carrying out cleaning 

or maintenance work or any other user 

servicing adjustments mentioned in this 

manual.

15. This sewing computer is provided with 

double insulation (except USA and Canada). 

Use only genuine replacement parts. Please 

note the advice on the servicing of double-

insulated products.

033301.71.04_2014-02_Manual_B330_B350_PE_B380_EN