Burley Kazoo User Manual

1.   Insert tow bar into frame coupling and align so that detent engages in detent hole on frame 

as shown above. Progressively tighten clamp bolts, alternating between bolts every 1-2 N·m 
until both bolts are at 6-8 N·m (4-6 ft-lb).

2.   Mount pedals (stamped R for right and L for left) to the corresponding crank arm and tighten. 

Left pedal uses left hand threads (counter-clockwise to tighten).

3.   Remove stem face plate, place handlebar into clamp and replace face plate.   

Center handlebar and tighten face plate bolts to 4-5 N·m (3-3.7 ft-lb).

4.   Insert flag into flagholder (inside left dropout).

1

Detent engaged 
in frame hole