HoMedics FMS-275H Instruction Manual

5

• NEVER cover the unit when it is in operation.

• DO NOT use this product for more than 15 minutes at a time.

•  Extensive use could lead to the product’s excessive heating and 

shorter life. Should this occur, discontinue use and allow the unit to 

cool before operating.

•  NEVER use this product directly on swollen or inflamed areas or skin 

eruptions.

• DO NOT use this product as a substitute for medical attention.

•  DO NOT use this product before bed. The massager has a 

stimulating effect and can delay sleep.

•  NEVER use this product while in bed.

•  This product should NEVER be used by any individual suffering from 

any physical ailment that would limit the user’s capacity to operate 

the controls.

• Not for use by children.

•  This unit should NOT be used by invalids without adult supervision.

•  This appliance is intended for household use only. 

NOTE: This unit is equipped with a protective thermostat that will 

shut off the motor if it overheats (LEDs may remain on). If your unit 

overheats, unplug the unit and let cool for 30 minutes before plugging 

in again and continuing use.

Instructions for Use

To reduce the risk of electric shock, this unit is equipped with a 

polarized plug (one blade wider than the other). This plug will fit in a 

polarized outlet only one way. If the plug does not fit fully in the outlet, 

reverse the plug. If it still does not fit, contact a qualified electrician to 

install the proper outlet. Do not change the plug in any way.
Shiatsu Massage & Heat
1.   Plug into a 120-volt outlet.
2.  It is highly recommended that the foot massager be used with 

socked feet. Do not use the unit with shoes.

3. Place massager on the floor in front of your chair or seat.
4.  To activate massage action, press Power   button once. The LED 

illuminator will glow blue (Fig. 1).

5.  To activate soothing heat with the massage, press the  

4

Power button a second time. The LED illuminator will glow red 

(Fig. 2). Allow a few moments for the heating action to warm up. 

6.  When finished, turn the unit “OFF” and unplug. “OFF” is reached 

by pressing the Power   button until the unit turns off. (The first 

press of the power button turns on the massage function; the 

second press turns on the soothing heat  

function, and the third press turns the unit off.)

NOTE: As a safety feature, the soothing Heat function cannot be 

used alone.
Air Compression Massage
1.   While Shiatsu Massage is activated, move the Air switch (Fig. 

2) up to desired Air Compression setting. Choose from Low, 

Medium and High compression options. It is recommended 

that you start with Low setting at first, to get a sense for how the 

compression feels on your feet. 

2.  If greater compression massage is desired, move to Medium or 

High setting.

NOTE: Air Compression Massage cannot be activated alone.

Maintenance

Place massager in its box or in a safe, dry, cool place. Avoid 

contact with sharp edges or pointed objects. To avoid breakage, 

DO NOT wrap the power cord around the unit. DO NOT hang the 

unit by the controller cord.

Unplug the unit and allow it to cool before cleaning.  Clean only 

with a soft, slightly damp sponge. NEVER allow water or any other 

liquids to come into contact with the unit.

•  DO NOT immerse in any liquid to clean.

•  Never use abrasive cleaners, brushes, or strong chemicals   

    that might or might not be flammable and/or damaging to  

    the product to clean.

•  DO NOT attempt to repair the massager. There are no user  

  serviceable parts. For service, contact the Consumer Relations  

  telephone number listed in the warranty section.

Fig. 1

Fig. 2