Honeywell ISM BAND XYR 5000 LINE User Manual
Figure 3-2 Overall Wiring Schematic
Warning! Explosions may result in death or serious injury. Do not remove
the instrument cover in explosive atmospheres when power and/or
communications are on.
the instrument cover in explosive atmospheres when power and/or
communications are on.
To begin the electrical installation first remove the explosion proof housing cover from the
Base Radio, if you have not already done so. Point the Base Radio antenna away from
you and look at the green PC Board found directly underneath the NEXT and ENTER
buttons. You should see two terminal blocks and some labels as shown in Figure 3-3.
Base Radio, if you have not already done so. Point the Base Radio antenna away from
you and look at the green PC Board found directly underneath the NEXT and ENTER
buttons. You should see two terminal blocks and some labels as shown in Figure 3-3.
Figure 3-3 Terminal Block Labels
8