Brother HL-630M Quick Setup Guide
7
Action 5: Plug in and Turn on Your Printer
1
Plug the power cord into the AC power
outlet.
outlet.
NOTE
This printer has no power switch. The
printer has a sleep mode which allows the
printer to automatically reduce power
consumption when not in use.
printer has a sleep mode which allows the
printer to automatically reduce power
consumption when not in use.
2
Make sure that the READY lamp is ON
after the printer has warmed up (about 60
seconds).
after the printer has warmed up (about 60
seconds).
Printing a Test Sample Page
We recommend that you print a test page. Refer to the instructions below.
1
Depress the TEST (FF/CONT) switch until
all lamps are turned ON. The printer starts
printing a test sample page.
all lamps are turned ON. The printer starts
printing a test sample page.
The printed page shows the basic control
panel operations.
panel operations.
NOTE
If the printer does not print a test sample page exactly, see “CHAPTER 6 Troubleshooting - Q
& A” of the User’s Guide. If after reviewing the information in the User’s Guide, your printer
still cannot print the test sample page exactly, consult your dealer.
& A” of the User’s Guide. If after reviewing the information in the User’s Guide, your printer
still cannot print the test sample page exactly, consult your dealer.