Mad Catz MC2 RACING WHEEL User Manual
Reprogramming the Button Layouts
The MC2 has been designed to be fully programmable for PLAYSTATION and
GAMECUBE. Only pedals and stick shift can be re-mapped.
To re-map pedals and stick shift,
1. Press the program button. (Note: While in program mode, the controller will
not function in a game)
2. Once the program button has been pressed, the Program LED will light up, you
may begin programming.
3. Press the pedal or stick shift you would like to re-map (LED begins flashing) and
then press the button that has the desired function (LED shuts off).
For example, to make the ‘right pedal’ button function as the ‘B’ button, the
following steps would be followed.
1. Press the Program button. The program button will light when activated.
2. Press the ‘right pedal’ button. The program light will flash.
3. Press the ‘B’ button.
4. The program light will go out. The button has been reprogrammed.
To clear the configuration and reset it back to the default settings, press the
Program button, then press the button twice to reset. All programming must be
done one session at a time. If you wish to change multiple buttons, repeat the
steps above for each button you wish to change.
GAMECUBE. Only pedals and stick shift can be re-mapped.
To re-map pedals and stick shift,
1. Press the program button. (Note: While in program mode, the controller will
not function in a game)
2. Once the program button has been pressed, the Program LED will light up, you
may begin programming.
3. Press the pedal or stick shift you would like to re-map (LED begins flashing) and
then press the button that has the desired function (LED shuts off).
For example, to make the ‘right pedal’ button function as the ‘B’ button, the
following steps would be followed.
1. Press the Program button. The program button will light when activated.
2. Press the ‘right pedal’ button. The program light will flash.
3. Press the ‘B’ button.
4. The program light will go out. The button has been reprogrammed.
To clear the configuration and reset it back to the default settings, press the
Program button, then press the button twice to reset. All programming must be
done one session at a time. If you wish to change multiple buttons, repeat the
steps above for each button you wish to change.
ENGLISH
ENGLISH
XBOX MC2 RACING WHEEL LAYOUT
Steering Wheel
This is the heart of the controller. It provides all of your steering control. Because it
is true analog, you will get more responsive and accurate control.
is true analog, you will get more responsive and accurate control.
Pedals
Provide analog acceleration (right pedal) and braking (left pedal). The pedals
emulate the right and left analog triggers (respectively).
emulate the right and left analog triggers (respectively).
Stick Shift
Emulates buttons ‘X’ and ‘A’. Press forward on the stick to press X, pull backwards
for ‘A’.
for ‘A’.
Directional Pad
This emulates the D-pad found on most control pads. This is used for navigating
through the menus and making menu changes.
through the menus and making menu changes.
Action Buttons
These buttons are fully analog and correspond to specific game functions detailed
in your software documentation and options menu.
in your software documentation and options menu.
Butterfly Switches
Press the left butterfly IN and button ‘A’ is emulated (full on). Push the left butterfly
3
4
Suction
Cups
Retractable
Leg Straps
Action
Buttons
Action
Buttons
Steering
Wheel
Stick
Shift
Select/Back
Start
D-Pad
Butterfly
Switches
Calibrate
Program
Pedals
Suction
Cups
Retractable
Leg Straps
Action
Buttons
Action
Buttons
Steering
Wheel
Stick
Shift
Select/Back
Start
D-Pad
Butterfly
Switches
Calibrate
Program
Pedals