Motorola Espresso Maker MC68340 User Manual

2- 10

MOTOROLA

This active-low output signal is used to track movement of words through the instruction
pipeline.

This development serial output signal helps to provide serial communications for
background debug mode.

This pin functions as 

BKPT

 in normal operation and as DSCLK in background debug

mode.

This active-low input signal is used to signal a hardware breakpoint to the CPU32.

This development serial clock input helps to provide serial communications for
background debug mode.

Assertion of this active-high output signal indicates that the CPU32 has acknowledged a
breakpoint and has initiated background mode operation.

The following signals are used by the direct memory access (DMA) controller module to
provide external handshake for either a source or destination. See  Section 6 DMA
Module for additional information on these signals.

This active-low input is asserted by a peripheral device to request an operand transfer
between that peripheral and memory. The assertion of 

DREQ

≈

 starts the DMA process.

The assertion level in external burst mode is level sensitive; in external cycle steal mode,
it is falling-edge sensitive.

This active-low output is asserted by the DMA to signal to a peripheral that an operand is
being transferred in response to a previous transfer request.

This active-low bidirectional signal is asserted by the DMA or a peripheral device during
any DMA bus cycle to indicate that the last data transfer is being performed. 

DONE

≈

 

is an

active input in any mode. As an output, it is only active in external request mode. An
external pullup resistor is required even during operation in the internal request mode.

F

re

e

sc

a

le

 S

e

m

ic

o

n

d

u

c

to

r,

 I

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

  

 

Freescale Semiconductor, Inc.

For More Information On This Product,

   Go to: www.freescale.com

n

c

.

..