Star Micronics DOT MATRIX PRINTER SP2000 User Manual

33

Full-cut command to the auto cutter

<ESC> "d" "0" or <ESC> "d" <0>

(1B)H (64)H (30)H or (1B)H (64)H (00)H

Full cut command.  Executes a full cut after printing the data in

the line buffer.

This command is valid only on SP2520/SP2560 series printers

and is ignored on SP2320/SP2360 series printers.

Partial-cut command to the auto cutter

<ESC> "d" "1" or <ESC> "d" <1>

(1B)H (64)H (31)H or (1B)H (64)H (01)H

Partial cut command.  Executes a partial cut after printing the

data in the line buffer.

This command is valid only on SP2520/SP2560 series printers

and is ignored on SP2320/SP2360 Õeries printers.

Full-cut command to the auto cutter after paper feed

<ESC> “d” “2” or <ESC> “d” <2>

(1B)H (64)H (32)H or (1B)H (64)H (02)H

Paper feed + full cut command

Executes the following actions after printing the data in the line

buffer.

(SP2520/2560) Feeds paper to the cutting position and executes

a full cut (Note 1).

(SP2320/2360) Feeds paper to the tear bar position (Note 2).

Note 1: Paper feed to cut position:  Executed in 1 inch units.

Note 2: Paper feed to tear bar position:  Executed in 7/6 inch

units.