HP PCI Dual Channel Ultra160 SCSI Host Adapter A6829A User Manual
Installing the A6829A Adapter
Specifying SCSI Parameters
Specifying SCSI Parameters
Chapter 2
40
Auto Termination
When you configure the A6829A adapter’s auto termination parameter,
you specify the adapter’s role in the SCSI bus termination, because the
adapter might be a point of termination.
you specify the adapter’s role in the SCSI bus termination, because the
adapter might be a point of termination.
For more information on SCSI bus termination, including a tutorial, you
can visit HP IT Resource Center (ITRC) at
can visit HP IT Resource Center (ITRC) at
.
Controlling Auto Termination
You can control auto termination in the A6829A adapter (see “Using the
Jumper for Controlling Auto Termination” on page 40) depending upon
the HP-UX system in which the adapter is installed (see Table 2-2 on
page 24).
Jumper for Controlling Auto Termination” on page 40) depending upon
the HP-UX system in which the adapter is installed (see Table 2-2 on
page 24).
Summary of Auto Termination Configurations
Table 2-4 summarizes the possible A6829A auto termination
configurations.
configurations.
Table 2-4
Summary of A6829A Auto Termination Configurations
Jumper Position
Auto Termination
Feature
Termination
Applied on
Adapter
Open/ON/ON
Enabled
Yes
Open/ON/ON
Enabled
Yes
Open/OFF/ON
Disabled
No
1
Open/OFF/ON
Disabled
No
1
Shorted/ON/ON
Disabled
No
1
Shorted/ON/ON
Disabled
No
1
Shorted/OFF/ON
Disabled
No
1
Shorted/OFF/ON
Disabled
No
1