Spectra Hello Kitty KT2089 User Manual
-1 -
FUNCTIONS AND CONTROLS
1. Shower Hanger
1. Shower Hanger
6.
Band Switch (AM/FM)
2. Battery Door
7.
LCD Clock
3. Speaker
8.
Mode Button (Clock)
4. Volume Control
9.
Set Button (Clock)
5. Tuning Knob
POWER SOURCE
This AM/FM Shower Radio operates on 4 X ‘AA’ size (UM-3) batteries (3 pieces on the left for radio and 1 piece on the right for clock).
1. Unlock and remove the Battery Door (#2) as shown in above diagram.
2. Following the polarity diagram (+ and -) as shown inside the battery compartment, insert 4 X ‘AA’ size (UM-3) batteries (not
included).
3. Close the Battery Door (#2) and lock the Battery Door again.
IMPORTANT: Be sure that the batteries are installed correctly. Wrong polarity may damage the unit.
4. For better performance and longer operating time, we recommend the use of alkaline-type batteries.
5. (a) Do not mix old and new batteries.
5. (a) Do not mix old and new batteries.
(b) Do not mix alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium) batteries.
6. If the unit is not to be used for an extended period of time, remove the batteries. Old or leaking batteries can cause damage to
the unit and will void the warranty.
7. Do not dispose of batteries in fire, batteries may explode or leak.
SETTING THE TIME OF CLOCK
When battery is first installed, press the Set Button (#9) to start running the clock.
1. In current time mode, press the Mode Button (#8) four times. Hour is displayed.
2. Press the Set Button (#9) until the correct hour is displayed.
3. Press the Mode Button (#8) again. Minute is displayed.
4. Press the Set Button (#9) until the correct minute is displayed.
5. Press the Mode Button (#8) to finish setting.
6. Press the Set Button (#9) to start the clock.
SETTING THE DATE OF CLOCK
1. In current time mode, press the Mode Button (#8) twice. Month is displayed.
2. Press the Set Button (#9) until the correct month is displayed.
3. Press the Mode Button (#8) again. Date is displayed.
4. Press the Set Button (#9) until the correct date is displayed.
5. To return to clock mode, push the Mode Button (#9) three times.
RADIO RECEPTION
1. Turn on the unit by rotating the Volume Control (#4) clockwise until a "click" is heard.
2. Set the Band Selector (#6) to "AM" or "FM" for the desired radio band.
3. Turn the Tuning Knob (#5) to select the desired radio station.
4. When tuning in AM reception, be sure to place the unit in a vertical position. To insure maximum AM sensitivity, try
SETTING THE TIME OF CLOCK
When battery is first installed, press the Set Button (#9) to start running the clock.
1. In current time mode, press the Mode Button (#8) four times. Hour is displayed.
2. Press the Set Button (#9) until the correct hour is displayed.
3. Press the Mode Button (#8) again. Minute is displayed.
4. Press the Set Button (#9) until the correct minute is displayed.
5. Press the Mode Button (#8) to finish setting.
6. Press the Set Button (#9) to start the clock.
SETTING THE DATE OF CLOCK
1. In current time mode, press the Mode Button (#8) twice. Month is displayed.
2. Press the Set Button (#9) until the correct month is displayed.
3. Press the Mode Button (#8) again. Date is displayed.
4. Press the Set Button (#9) until the correct date is displayed.
5. To return to clock mode, push the Mode Button (#9) three times.
RADIO RECEPTION
1. Turn on the unit by rotating the Volume Control (#4) clockwise until a "click" is heard.
2. Set the Band Selector (#6) to "AM" or "FM" for the desired radio band.
3. Turn the Tuning Knob (#5) to select the desired radio station.
4. When tuning in AM reception, be sure to place the unit in a vertical position. To insure maximum AM sensitivity, try
repositioning the unit until the best reception is obtained.
5. Adjust the Volume Control (#4) to obtain the desired sound level.
6. Turn off the unit by rotating the Volume Control (#4) fully counterclockwise until a "click" is heard.
6. Turn off the unit by rotating the Volume Control (#4) fully counterclockwise until a "click" is heard.
CAUTION
Your AM/FM Shower Radio has been constructed to resist mild steam and light splashes from the shower or bath only. It
should not be operated under running water and under no circumstances should it be fully immersed in water.
CARE AND MAINTENANCE
1. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
CARE AND MAINTENANCE
1. Clean your unit with a damp (never wet) cloth. Solvent or detergent should never be used.
2. Avoid leaving your unit in direct sunlight or in hot, humid or dusty places.
3. Keep your unit away from heating appliances and sources of electrical noise such as fluorescent lamps or motors.
4. Your unit has rubber seals to minimize the risk of moisture getting inside. However, do not immerse it in water since
permanent damage to the electrical and mechanical parts will result.