Panasonic Arbitrator 360 Operating Guide

113

T

roubleshooting 

and Reference

• Is a P2 card inserted in a P2 card slot?

• Is the P2 card slot cover closed?

•  Is there any free space on the P2 card? Check 

the remaining space, and upload files to clear 

some space.

•  Make sure that the write-protect switch of the P2 

card is not set to PROTECT.

•  Check if a 16 GB or higher capacity P2 card was 

formatted in this unit. A 16 GB or higher capacity 

P2 card whose folders have been modified on a 

PC must be reformatted in this unit.

•  Are the [GPIO/SERIAL] connector or recording 

trigger criteria set correctly?

•  Check whether the recorder is set to administrator 

setup status. 

•  Check whether the correct cables have been 

connected to the video input connectors.

•  A power outage or power cable (included in the 

separately sold Cable Kit) disconnection during 

recording may damage the P2 card or corrupt 

data on a P2 card. Never turn the power off 

while recording to a P2 card.

•  Do not insert or remove a P2 card when another 

P2 card is being accessed as this may damage 

the P2 card or corrupt data on the P2 card.

•  Corrupted data may be restorable (see “Restoring 

Files” on page 71 for details).