National Instruments SHC68-H1X38 User Manual

The NI SHC68-H1X38 cable is a single-ended cable that breaks out each 
NI digital waveform generator/analyzer signal into two 0.1 inch header 
receptacles, one receptacle each for the signal and ground. The 
NI SHC68-H1X38 cable provides an easy way to connect NI single-ended 
high-speed digital waveform generator/analyzer devices to various types of 
devices and circuits for interfacing, testing, or analysis.

This cable offers connectivity similar to that found on a typical logic 
analyzer, so you can use it in logic analyzer-type applications. Unlike a 
typical logic analyzer, however, this cable also allows for simultaneous 
pattern generation and acquisition so that it can be used in 
stimulus/response applications as well.

This guide explains how to set up and use the NI SHC68-H1X38 cable with 
single-ended NI digital waveform generator/analyzer modules.