Ultimate Support Systems amp-150 Leaflet

STEP 1
Turn stand upside-down and  
locate the RED Locking Knob.  
Turn the Locking Knob ¼ turn  
counter clockwise to the open  
position shown above.

STEP 2
Turn the stand back to the upright
position and fold all three legs down 
until they stop in the open position. 
(The legs should move freely to the 
open position, if they do not, make 
sure the Locking Knob is in the open 
position.) Unfold the cradle arms to  
the down position.

STEP 5
The angle of the stand can be adjusted
by selecting one of three positions. 
Push in the snap button and slide the 
leg out. The snap button must lock into 
the selected hole.

STEP 3
After all three legs are in the open
position turn the RED Locking Knob
¼ turn clockwise to the closed  
position shown above.

STEP 4
To adjust the height of the upright tube,
pull up/open the locking lever, slide out
the top tube to desired height and 
return the locking lever to the down/
closed position.

Optimal Volume
Three tilt positions direct the amp’s 
sound up to your ears.

Leg Lock
Legs lock open for worry-free stability of 
up to 75 lbs. Legs fold and lock, creating 
a one-piece, portable unit.

Mic Boom Attachment
Threaded top tube for mic boom 
attachment; no need to carry an  
extra mic stand. 

Bult-in Inovation
Are you experiencing hearing loss or 
do your band members complain about 
your volume? Well, your recent purchase 
will help! With the AMP-150’s three tilt 
positions you can tip your amp back 
and face it toward you, allowing you to 
hear the high frequencies at much lower 
volume levels. In addition, your sound  
guy will have less vocal mic bleed and 
better control of the FOH. End result:  
your band will stop threatening to  
unplug you!