Aiphone AI-SSV Leaflet

Page of 2
TOLL FREE TECHNICAL SUPPORT: (800) 692-0200
TOLL FREE FAX LINE: (800) 832-3765
E-MAIL: tech-serv@aiphone.com
AI-SSV Instr.
1206JD
SPECIFICATIONS:
Audio Power Source:
Supplied by master station
Speaker:
625 ohms, 1W/25V, 2" diameter, water proof and puncture resistant, 2.4 oz. magnet
Call Button:
SPST call button, momentary activation.  Limited stop button
Call Annunciation:
Call tone rings at master for duration set in programming of system.
Communication:
Hands free at sub.  Master is push-to-talk, release-to-listen, or VOX via handset.
Video Output:
75 Ohm / 1Vp-p composite video
Iris Control:
Auto
Minimum Illumination:
1.0 lux
Effective Picture Element: 512x492 NTSC
Lens Mount
3.7mm Cone Pinhole Lens
Camera Power Source:
12V DC, 100mA (via included power supply)
MTBF:
(Mean Time Before Failure) 80,000 Hours
Faceplate:
12 gauge stainless steel
Mounting:
Flush mount into a 2-gang box (minimum 2-½” depth) or surface mount into SBX-2G (sold separately)  
Tamper proof screws included (6x32 for use with flush 2-gang box) with T-10 TORX bit
When using SBX-2G, use the hardware included with that unit. 
Terminations:
Color-coded pre-wired pigtails.  Orange, Brown and Black wires connect to AI-900RS connector. 
Red connector = 12V DC power; Yellow connector = 75 Ohm / 1Vp-p video output (BNC).
Operating Temperature:
14 F ~ 140°F (-10°C ~ 60°C)
Audio Wiring:
2 conductors w/overall shield.  Use Aiphone #822202 wire.
Audio Wiring Distance:
1650' (24AWG); 2650' (22AWG); 
Video Wiring:
Independent BNC connection from sub station pigtail to destination video device. 
Dimensions (H x W x D):  AI-SSV alone:  4-11/16" x 4-11/16" x 2"
With SBX-2G:  4-3/4" x 4-7/8" x 3-5/8" (Top) 2-3/8" (Bottom)
Aiphone Communication Systems
1700 130th Ave. N.E.
Bellevue, WA  98005
(425) 455-0510
FAX (425) 455-0071
Camera
Call Button
Yellow BNC connector for 
video output
Speaker
AI-SSV BACK VIEW & WIRING DIAGRAM:
Wiring to AI-900RS via supplied connector:
Orange: A (top)
Brown: B (middle)
Black:
C (bottom)
Top View
Of Connector
Red connector for 12V DC camera 
power input (from included power supply)
Power supply dimensions:
1-
⅝" W x 2-¼” H x 1-⅝” D
6' DC cord.