Kentrox AI296 User Manual

AI296 Version 9.8x User’s Guide

Link Configuration: Disconnect Options Configuration

Disconnect Options Configuration

Disconnect options configure the parameters that are used when AI296 disconnects. 
These options are available for asynchronous and asynchronous PPP links. The 
following configuration items are available:

z

z

z

Disconnect Inactivity Timer Settings

The disconnect inactivity timer settings are configured using three menu items:

z

Disconnect inactivity timer

—Defines an inactivity timer value. This value 

establishes a timeout interval after which the link will automatically disconnect if 
no data has been sent or received for the specified number of seconds. This value 
only applies to incoming calls on links that have a retry interval timer setting of 

0

 

and a link application setting of 

LOGIN

 or 

ALIAS

 (

AppAlias

).



Note: The 

Disconnect inactivity timer

 option must be set to a value greater than 

0 for the inactivity timer to function.

z

Inactivity timer enabled when link receives call

—Enables or disables the 

disconnect inactivity timer when the link receives a call.

z

Inactivity timer resets on incoming characters from destination

—When enabled, 

incoming characters count as activity on a link (the inactivity timer resets). When 
disabled, they do not count (the inactivity timer does not reset).

Data for disconnect inactivity timer

Toggle for Inactivity timer enabled when link receives call and Inactivity timer resets 
on incoming characters from destination

Async

1. Access Menu 4.2.11.12.12.

2. For 

04 Disconnect inactivity timer

, enter 

4,

 and the timer value. The default is 

0

.