Kentrox AI296 User Manual

AI296 Version 9.8x User’s Guide

Link Configuration: Virtual Circuit Configuration

The timer type, range, and default settings depend on the PVC type. Refer to 

 for PVC types, timer types, ranges, and defaults.

This example displays:

z

Low PVC

 set to 

30

z

High PVC

 set to 

50

z

PVC Type

 set to 

Active

z

Timer Value

 set to 

230

.

SVC Configuration Settings

SVCs are network connections that are established when transmission is required 
and are disconnected when the session is complete. The SVC settings are configured 
using the following menu items:

z

Incoming only SVC low

—Defines the minimum LCN used for incoming only SVCs.

z

Incoming only SVC high

—Defines the maximum LCN used for incoming only SVCs.

z

Two-way SVC low

—Defines the minimum LCN used for an SVC.

z

Two-way SVC high

—Defines the maximum LCN used for an SVC.

z

Outgoing only SVC low

—Defines the minimum LCN used for outgoing only SVCs. 

AI296 can place calls on outgoing only SVCs greater than the maximum PVC 
and/or two-way SVC.

z

Outgoing only SVC high

—Defines the maximum LCN used for outgoing only SVCs. 

AI296 can place calls on outgoing only SVCs.

Table 6-2   PVC and Timer Type

Active

Call Timer

30 to 600 s

30 s

Connect on Activity

Inactivity Timer

1 to 600 s

1 s

Passive

Reset Timer

0 s

0 s

PVC Edit Menu

Link being configured . . . . . . . . . . . . . . . . . . . . . . . . . .   03
Low PVC  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 30
High PVC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. 50
PVC Type . . . . . . . . . . . . .     Passive   [Active]   ConnectOnActivity
Timer Value  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 230