Kentrox AI296 User Manual

AI296 Version 9.8x User’s Guide

AI296 Commands: diag-conn

diag-conn

This command displays a list of enabled links along with connection information for 
each link. Data can be displayed continuously, one page at a time, or sent to the 
screen one time only for all connections. The default mode is a continuous display.

shell

diag-conn

This example displays existing connections across AI296.



Note: For explanations of the states shown, such as 

idle

 and 

data transfer

, refer to 

section 

 C O N N E C T I O N S  Mode: Continuous  [Search Inactive]

 103. ASY.1.1                  [  Idle           ]
 113. TCP 172.16.2.9#1032      <--Data Transfer-->   SHELL

Enter S-kip, I-nternal, A-ll, M-ore, D-etail, F-ind, P-revPg, N-extPg or Q-uit:

S-kip

This option bypasses connections. It gives a prompt for the number 
of connections to skip.

I-nternal

This option toggles between 

I-nternal

 and 

H-ide Int

. 

I-nternal

 

displays all the internal loopback connections along with other 
connections.

A-ll

This option displays all connections without page breaks. The 
display does not show duplicate connections. For example, if 
connection number 15 is connected to 30, the connection from 30 
to 15 will not appear.

M-ore

This option toggles between 

M-ore

 and 

L-ess

. It displays the link and 

PVC number for X.25 PVCs, the link and X.121 addresses for X.25 
SVCs, and the alias used to make the connection.