Kentrox AI296 User Manual

AI296 Version 9.8x User’s Guide

System Configuration: General System Properties Configuration

Passive Link Settings

The passive link settings are configured using three menu items. The configurable 
values are:

z

Passive link down state

—Configures standby (DMlock) mode for a passive link. 

When this feature is turned on, a passive link will go into DMlock mode after all 
calls have cleared. When turned off, a passive link will stay up when all calls have 
cleared.

z

Passive link stay inactive timer

—Sets the number of seconds a passive link waits 

for a connection to come up before failing.

z

Passive link standby mode timer

—Configures the amount of time a link remains in 

standby mode before it becomes idle. Immediately after a passive link becomes 
inactive, it goes into the standby (DMlock) mode.

Toggle for the 

passive link down state

Data for the 

passive link stay inactive timer

 and the 

passive link standby mode timer

1. Access Menu 4.2.11.

2. For 

09*Bring passive link down when all calls have cleared

, enter 

9

 to select 

ON

 or 

OFF

. The default is 

OFF

.

3. For 

10 Passive link Stay Inactive timer

, enter 

10,

 and a value in seconds for the 

passive link stay inactive timer. The minimum value is 

25

 seconds and the default 

is 

60

 seconds.

4. For 

11 Passive link Standby Mode timer

, enter 

11,

 and a value in seconds for the 

passive link standby mode timer. The minimum value is 

5

 seconds and the default 

is 

25

 seconds.