Magnetek Network Hardware Series 3 User Manual

 

Impulse DataLogger Series 3 Instruction Manual                                                        
2/1/05 
                                                                                                                                  2 of 16 

    

 The DataLogger Series 3 was 

 designed to simplify troubleshooting 
and provide for detailed operational 
histories that are necessary for 
genuine preventive maintenance. 
 
     The DataLogger is a nonvolatile 
solid state (flash memory) recording 
device that allows the operator to 
easily and logically access the 
Run, Alarm & Fault histories  
of the IMPULSE•G+/VG+ Series 2 
and IMPULSE•G+/VG+ Series 3 
drives. It will also store 5 parameter 
sets. The DataLogger was 
designed to be a fit and form 
replacement to the Series 3 keypad. 
An additional cable is required  
for use with Series 2 drives. 
     The DataLogger System consists of 
three (3) components: 
 the DataLogger, the USB cable 
 for PC communication and 
DataPulse™ Series 3 software. 

 

     The DataLogger was designed to include sufficient memory to log the last 1400 
Run Events, the last 200 Alarm Events and the last 200 Fault Events. In addition 
to the Alarm and Fault history, a Trace function is provided for viewing drive data 
that lead to the Alarm/ Fault condition. The user-friendly  DataLogger can be 
effectively applied by those with little or no knowledge of inverters. All data 
acquisition is automatic, and data viewing and analysis is available via the LCD 
display or by uploading and viewing on your PC. The logger is powered by the 
inverters 5 VDC internal supply when logging or by the USB when connected to 
the PC. The internal clock is powered by a replaceable Lithium coin type battery.