Pelco Computer Keyboard C581M-B User Manual

Pelco Manual C581M-B (1/04)

17

1. Press the SPOT MONITOR key. The green LED over

the SPOT key lights.

2. Select the camera.

Addressing by Multiplexer (Switch 7 OFF)
a. On the number pad, press the address number of the

multiplexer (1-16 if the keyboard is connected to a
multiplexer; 1-8 if the keyboard is connected to a
server), then press the UNIT key. The LED displays
the address.

b. On the number keypad press the number of the

camera (1-16), then press the CAM key.

Addressing Consecutively (Switch 7 ON)
On the number keypad press the number of the
camera, then press the CAM key. Refer to Table C for
camera numbers.

3. On the number keypad press 96, then press the

PRESET key.

1. Press the MAIN or SPOT MONITOR key. The green

LED over the MAIN or SPOT key lights. When using the
MAIN MONITOR, the SPOT MONITOR DISPLAY menu
item in the Advanced System Setup menu must be
set to TRACK MAIN (refer to the 

Advanced System

Setup

 section).

2. Select the camera.

Addressing by Multiplexer (Switch 7 OFF)
a. On the number pad, press the address number of the

multiplexer (1-16 if the keyboard is connected to a
multiplexer; 1-8 if the keyboard is connected to a
server), then press the UNIT key. The LED displays
the address.

b. On the number keypad press the number of the

camera (1-16), then press the CAM key.

Addressing Consecutively (Switch 7 ON)
On the number keypad press the number of the
camera, then press the CAM key. Refer to Table C for
camera numbers.

3. On the number keypad press 1, then press the

PATTERN key.

4. To stop the pattern, press a pan/tilt key.

Table B.  Operation Guide (Continued)

(Continued on next page)

Begin a pattern.

The pattern operates until stopped.

Stops auto or random scanning, if
operating, and activates manual
scanning.

Start manual scan (or
stop auto or random
scan) with 15-bit
receiver.