Spark Tech E810 Leaflet
E810
Power Over Ethernet 8 Port Switch Hub
PRODUCT HIGHLIGHTS
z
IEEE 802.3af Compliance
z
Cost Saving, No Power Cabling for WLAN AP
z
Remote Powered feeding up to 100 meters
z
Centralized Power Distribution
z
Advanced Auto-Sensing Algorithm supplying
inline power only to 802.3af end devices
inline power only to 802.3af end devices
z
High Safety Short Circuit Protection
z
Wide Range AC input
SPECIFICATIONS
INTERFACE
WAN Port
1 X 10/100 base-T Ethernet (RJ-45) for Uplink
LAN Port
8 X 10/100 base-T Ethernet (RJ-45) for Power over Ethernet LAN
LED (36)
1 x System Power (Green)
1 x Uplink Link/Act (Green),
1 x Uplink FDX/COL (Yellow)
1 x Uplink 10/100 (Green)
1 x Uplink Link/Act (Green),
1 x Uplink FDX/COL (Yellow)
1 x Uplink 10/100 (Green)
8 x Power (Green & Red)
8 x Channel Active (Green)
8 x Channel Transmission Mode (Yellow)
8 x Channel Transmission Speed (Green)
8 x Channel Active (Green)
8 x Channel Transmission Mode (Yellow)
8 x Channel Transmission Speed (Green)
POWER SPECIFICATION
OUTPUT VOLTAGE +48
/16W(Maximum)
INPUT POWER REQUIREMENTS
Voltage
Auto sensing 90/240 VAC; 47/63 Hz
Power consumption 100 Watts (+48Vdc)
PHYSICAL SPECIFICATION
Dimension
436 X 260 X 44mm (17.2 x 10.2 x 1.7in)
Weight
3.2 kg
MECHANICAL SPECIFICATION
Module design; 1U Rack mount sized; Metal housing
ENVIRONMENT SPECIFICATION
Temperature
Humidity
Operating
0 to 40oC
90% (non-condensing)
Storage
-25 to 85oC
95% (non-condensing)
Operating Altitude -1,000 to 10,000 ft (-304.8 to 3048m)
REGULATORY COMPLIANCE
CE, FCC, UL
WARRANTY
1 year
PACKAGE CONTENT
One E810 Switch Hub
One Installation Guide
One User Manual CD
One Power Cord
RELEATED PRODUCTS
E-100 Ethernet / Power Splitter
E-110 Ethernet / Power Integrator
E-110 Ethernet / Power Integrator
Rev 1.1
FEATURES & BENEFITS
CENTRALIZED POWER DISTRIBUTION
E810 eliminates the need for an AC outlet at
each AP location. The power supply is provided
by only one single Ethernet cable to each AP
instead of two separated power and data
connections. This significantly reduces the
complexity and cost of deploying devices,
especially in some hard-to-reach areas where
AC power is difficult to access.
COST-EFFECTIVE DEPLOYMENT
Enables enterprises to power up IP devices (IP
phones, wireless access points, net cameras)
while maintaining connectivity to standard
10/100Mbps Ethernet devices simultaneously.
COMPATIBLE WITH IEEE 802.3AF
IEEE 802.3af is a power over Ethernet draft
standard. It is supported by a growing number
of PoE suppliers. SparkLAN E810 works with any
802.3af compliant end devices of different
vendors.