Brocade Communications Systems Switch 53-1001762-01 User Manual

debug lldp packet

5

debug lldp packet

Enables debugging for Link Layer Discovery Protocol (LLDP).

Synopsis

debug lldp packet {all | interface tengigabitethernet slot/port} [both | detail [both | rx | tx ] | rx | 
tx]

no debug lldp packet { all | interface tengigabitethernet slot/port }

Operands

all    

Turns on LLDP packet debugging on all interfaces. 

interface tengigabitethernet

Specifies the 10 Gbps Ethernet interface.

Specifies the slot number.

Specifies the port number.

both 

Turns on debugging for both transmit and receive packets.

detail

Turns on debugging with detailed information.

rx

Turns on debugging for only received LLDP packets.

tx

Turns on debugging for only transmitted LLDP packets.

Defaults

By default, debugging is not turned on.

Command

Modes

Privileged EXEC mode

Description

Use this command to enable debugging for Link Layer Discovery Protocol (LLDP). Use the no debug 
lldp packet command to disable debugging.

Usage

Guidelines

To display debugging outputs on a particular cmsh session, use the terminal monitor command.

Examples

To enable debugging of LLDP for both received and transmitted packets on 10 Gbps Ethernet 
interface 0/1:

switch#debug lldp packet interface tengigabitethernet 0/1 both

switch#show debug lldp

LLDP debugging status:

Interface te0/1    : Transmit Receive

See Also

show debug lldp