Lanzar Car Audio Car Video System SVHR56 User Manual
Installation Guide:
1.Slide monitor into dash mount S2 and then use fastener to tighten(Optional)
2.Firmly attach dash mount on a flat surface and adjust viewing angle of
monitor by tightening the fastener at the side
monitor by tightening the fastener at the side
A.When you install the monitor into the seat head cushion make sure that the
monitor connecting cable assembly has already been pull through by the
supporting pipe.
B.Before connecting the monitor, pull the connecting cable assembly through
the headrest shroud as shown in diagram2.
C.Place headrest shroud into the opening and secure it with correct fasteners.
monitor connecting cable assembly has already been pull through by the
supporting pipe.
B.Before connecting the monitor, pull the connecting cable assembly through
the headrest shroud as shown in diagram2.
C.Place headrest shroud into the opening and secure it with correct fasteners.
Note: Installing Method of main cable assembly
1.Reeve the main cable assembly through (or beside) the head rest support tube.
2.Secure and protect the cable assembly from damage when the head rest is adjusted.
1.Reeve the main cable assembly through (or beside) the head rest support tube.
2.Secure and protect the cable assembly from damage when the head rest is adjusted.
1
6
A
B