Brother HS-5300 Owner's Manual
USER’S GUIDE
5–2
English: HS3 User’s Guide, Chapter 5
MEMORY EXPANSION
Both of the the HS-5000 and HS-5300 have 24Mbytes, 8Mbytes on the board
and 16Mbytes in the one of the memroy expansion slots. There are 2 slots for
optional memory and the memory can be expanded up to a total of 72 Mbytes.
You need to install commercially available single in-line memory modules
(SIMMs) in those slots to expand the memory.
and 16Mbytes in the one of the memroy expansion slots. There are 2 slots for
optional memory and the memory can be expanded up to a total of 72 Mbytes.
You need to install commercially available single in-line memory modules
(SIMMs) in those slots to expand the memory.
In general, the SIMM you install must have the following specifications:
Type: 72 pin and 32 bit or 36 bit output
Access Time: 80 nsec. or less
Capacity: 1, 2, 4 ,8, 16, or 32 Mbyte
Height: 38 mm (1.5 inches) or less
Access Time: 80 nsec. or less
Capacity: 1, 2, 4 ,8, 16, or 32 Mbyte
Height: 38 mm (1.5 inches) or less
The following capacity of a SIMM for installing is recommended;:
• 1 Mbyte HITACHI HB56D25632B-6A, -7A,
• 1 Mbyte HITACHI HB56D25632B-6A, -7A,
MITSUBISHI MH25632BJ-7
• 2 Mbyte HITACHI HB56D51232B-6A, -7A
MITSUBISHI MH51232BJ-7
• 4 Mbyte HITACHI HB56A132BV-7A, -7AL, -7B, -7BL
MITSUBISHI MH1M32ADJ-7
• 8 Mbyte HITACHI HB56A232BT-7A, -7AL, -7B, -7BL
MITSUBISHI MH2M32EJ-7, MH2M32DJ-7
• 16 Mbyte TOSHIBA THM324000BSG-60,-70,-80
• 32 Mbyte TOSHIBA THM328020BSG-60,-70,-80
• 32 Mbyte TOSHIBA THM328020BSG-60,-70,-80
There are available 40 bit output SIMMs for workstations. Such SIMMs do not
fit this printer.
For supply of SIMMs, consult the dealer where you purchased the printer.
fit this printer.
For supply of SIMMs, consult the dealer where you purchased the printer.