Honeywell HEGS5001 User Manual
5.2.11 Delete a Tour
1. Press
the
Dome Menu (
1. ___
3. ___
) key.
2. Press
+ or – until Tour Menu is displayed.
3. Press
Enter (
).
4. Press
+ or – until Delete is displayed.
5. Press
Enter (
).
6. Enter the desired tour # (1-3) using the numeric keys.
7. Press
Enter (
).
5.2.12 Programming Sector IDs
Sector IDs are used for labeling specific areas that the PTZ camera views. Whenever a
PTZ camera is under manual control and it is viewing a programmed sector, the name
given that sector is added to the video signal.
PTZ camera is under manual control and it is viewing a programmed sector, the name
given that sector is added to the video signal.
Note: The camera ID display must be enabled. When an operator is viewing the monitor
or a video recorder is recording a specific dome, this labeling provides a quick
reference for the area being displayed. Up to 16 Sector IDs can be programmed
reference for the area being displayed. Up to 16 Sector IDs can be programmed
for each Scan Unit.
1. Press
the
Dome Menu (
1. ___
3. ___
) key.
2. Press + or - until Sector/Priv Menu is displayed.
3. Press
Enter (
).
4. Press
+ or – until Program is displayed.
5. Press
Enter (
).
6. Enter the desired sector number (0-15) to program.
7. Press
Enter (
).
Rev. 1.01
34 900.0800
19-Jun-06