Sharp MD-SR50H User Manual
46
45
Specifications
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes
for product improvement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some deviations
from these values in individual units.
for product improvement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some deviations
from these values in individual units.
References
■
General
Power source:
DC 5V:
AC adaptor (AC 230 - 240V, 50/60 Hz)
DC 1.5V:
Commercially available, “AA” size (LR6), al-
kaline battery x 1
kaline battery x 1
DC 1.2V:
Optional rechargeable Nickel-Metal Hydride
battery (AD-N70BT) x 1
battery (AD-N70BT) x 1
DC 4.5V:
Optional car adaptor, AD-CA20X
(for cars with a 12-24V DC negative earth elec-
trical system)
(for cars with a 12-24V DC negative earth elec-
trical system)
Power consumption: 7 W (AC adaptor)
Output
Output
RMS; 20 mW (10 mW + 10 mW)
power:
(0.2% T.H.D.)
Charging
Approx. 3.5 hours (90 %)
time:
Approx. 5.5 hours (fully charged)
(When using the AC adaptor included with the unit)
(When using the AC adaptor included with the unit)
Battery life:
●
The continuous recording time is for analogue inputs when the
volume level is set to “VOL 0”.
volume level is set to “VOL 0”.
●
The continuous play time shows the value when the volume
level is set to “VOL 15”.
level is set to “VOL 15”.
●
The above values are the standard values when the unit is
charged and used at an ambient temperature of 20
charged and used at an ambient temperature of 20
°
C (68
°
F).
●
The operating time when using an alkaline battery may be dif-
ferent, depending on the type and manufacturer of the battery,
and on the operating temperature.
ferent, depending on the type and manufacturer of the battery,
and on the operating temperature.
Dimensions:
Width:
99.9 mm (3-15/16”)
Height:
22.9 mm (29/32”)
Depth:
77.9 mm (3-3/32”)
Weight:
168 g (0.37 lbs.) without battery
Input socket:
Line/optical digital, microphone
(powered by the main unit)
(powered by the main unit)
Output socket:
Earphones (impedance: 32 ohms)
■
MiniDisc Recorder
Type:
Portable MiniDisc recorder
Signal readout:
Non-contact, 3-beam semi-conductor laser pick-up
Audio channels:
Stereo 2 channels/monaural (long-play mode)
1 channel
1 channel
Frequency response: 20 – 20,000 Hz (
±
3 dB)
Rotation speed:
Approx. 400 – 900 rpm
Error correction:
ACIRC (Advanced Cross Interleave Reed-
Solomon Code)
Solomon Code)
Coding:
ATRAC (Adaptive Transform Acoustic Coding),
24-bit computed type
24-bit computed type
Recording method: Magnetic modulation overwrite method
Sampling frequency:44.1 kHz (32 kHz and 48 kHz signals
Sampling frequency:44.1 kHz (32 kHz and 48 kHz signals
are converted to 44.1 kHz, and then recorded.)
Wow and flutter:
Unmeasurable (less than
±
0.001% W. peak
)
When using a commercially
available, high capacity, “AA”
size (LR6), alkaline battery
available, high capacity, “AA”
size (LR6), alkaline battery
Continuous recording:
Approx. 3 hours
Continuous play:
Approx. 7 hours
When using the optional re-
chargeable battery AD-N70BT
(fully charged)
chargeable battery AD-N70BT
(fully charged)
Continuous recording:
Approx. 4.5 hours
Continuous play:
Approx. 6.5 hours
Recording level
MIC H
MIC L
LINE
Reference input level
0.25 mV
2.5 mV
100 mV
Input impedance
10 k ohms
10 k ohms
20 k ohms
10 k ohms
20 k ohms
Input sensitivity:
Output level:
Specified
output
—
250 mV (-12 dB)
Maximum
output level
10 mW + 10 mW
—
Load
impedance
32 ohms
10 k ohms
Earphones
LINE