Behringer Ultrabass BVT5500H Owner's Manual

ULTRABASS BVT4500H/BVT5500H

Introduction

Introduction

With the BVT4500H/5500H you have acquired a pro-level amplifier

from our ULTRABASS series. This classic bass amp combines

an uncompromising, “cutting-through” sound with a full range of

sound-shaping features.

The Design Concept

1.1

Over the past few years, flexibility has become important. Bass

players must now offer a broad range of sounds and play in differ-

ent venues: home studios, professional studios, and live concerts.

Additionally, the world of electric bass playing has changed. New

effects devices and basses, with five or six strings, are launched

all the time. There is also the desire to create one’s own, “unique”

sound—which can only be achieved with innovative amplifiers.
In response to these dual needs (flexibility and individuality), the

BVT4500H/5500H offers you:

TONE and GRAPHIC EQ features—for shaping and refining

sound.
VTC (Virtual Tube Circuitry)—adding the warmth of vintage

tube circuitry to sound.
Jacks for connecting the BVT4500H/5500H to effects pro-

cessors, mixers/recording units, other preamps, and other

power amps.
2 types of speaker jacks: ¼" TS and compatible with Neutrik

Speakon connectors.

Before you get started

1.2

Shipment

1.2.1

Your product was carefully packed at the factory to ensure safe

transport. Nevertheless, if the box is damaged inspect the unit

immediately for signs of damage.

If the unit is damaged please do NOT return it to us,

but notify your dealer and the shipping company im-

mediately; otherwise, claims for damage or replacement

may not be granted.

We recommend that you use a flight case to give the unit

optimum protection during use or transport.

Always use the original box to prevent damage during

storage or transport.

Make sure that children cannot play unsupervised with

the unit or its packaging.

Please ensure proper disposal of all packing

materials.

Initial operation

1.2.2

Ensure adequate air supply and to avoid overheating do not place

the unit near radiators etc.
Before you connect your BVT4500H/5500H to the mains, please

make sure that your local voltage matches the voltage required

by the unit.
CAUTION: The following applies only to BVT versions that can

be switched between 120 V and 230 V: The fuse holder on the

mains connector has 3 triangular markings. Two of these triangles

opposing each other. The device is set to the operating voltage

printed next to these markers and can be set to another voltage

by turning the fuse holder by 180°.

Please note that when operating the unit at 120 V, a

higher fuse rating is required. Blown fuses must be

replaced by fuses of the correct rating!

If you set the unit to a different mains voltage, be sure

to use a fuse of the correct type and rating. Please refer

to the “SPECIFICATIONS” for details.

Blown fuses must be replaced by fuses of the correct

rating! Please refer to the "SPECIFICATIONS" section

for the applicable rating.

CAUTION!

Before changing the fuse, switch off the device and

pull the plug to avoid electric shock or damage to the

device.

For connection to the mains use the enclosed power cord with cold

connector which complies with the relevant safety regulations.

Please make sure that all devices are properly grounded.

For your own safety, never remove or disable the ground

conductors from the devices or on the power cords. The

unit must always be connected to the mains outlet with

a protective grounding connection.

Please ensure that only qualified personnel install and

operate the BVT4500H/BVT5500H. During installation

and operation the user must have sufficient electrical

contact to earth. Electrostatic charges might affect the

operation of the unit.

WARNING!

Extreme output volumes may damage your hearing and/

or your loudspeakers. Turn down all volume and level

controls before you switch on the unit. Always set the

volume to an appropriate level.

Important notes concerning installation

The sound quality may diminish within the range of pow-

erful broadcasting stations and high-frequency sources.

Increase the distance between the transmitter and the

device and use shielded cables for all connections.

Online Registration

1.2.3

Please register your new BEHRINGER equipment right after your

purchase by visiting http://www.behringer.com and read the terms

and conditions of our warranty carefully.
Should your BEHRINGER product malfunction, it is our intention

to have it repaired as quickly as possible. To arrange for warranty

service, please contact the BEHRINGER retailer from whom the

equipment was purchased. Should your BEHRINGER dealer

not be located in your vicinity, you may directly contact one of

our subsidiaries. Corresponding contact information is included

in the original equipment packaging (Global Contact Information/

European Contact Information). Should your country not be listed,

please contact the distributor nearest you. A list of distributors

can be found in the support area of our website (http://www.

behringer.com).
Registering your purchase and equipment with us helps us process

your repair claims more quickly and efficiently.
Thank you for your cooperation!