Binatone TTSE110 Leaflet

Safety Precautions
Follow all manufacturer safety guidelines for operating your device.  
Failure to practice safe usage of GPS device while driving may result 
in damage, injury, or death. 

Arkon is not responsible for any damages caused to your car, your 
device, or yourself due to the installation or use of this pedestal mount.

Arcadia, CA 91006 USA

Designed in USA | Made in China

© Copyright 2010 Arkon Resources, Inc.

Consumer Hotline:
USA     (800) 841-0884
INT’L    (626) 254-9005
Monday - Friday 9 am - 5 pm, PST

®

Package Contents:
(1) GN014-SBH Travelmount® Mini windshield suction pedestal
(1) GN047-SBH - Removable air vent mount with dual-T swivel ball head
(1) APTTSE - Dual-T to TomTom Start™ & Ease™ Adapter plate

(1) AP013 Self-Adhesive dashboard or console pedestal mounting disc
(1) Alcohol cleaning pad

GN047-SBH
Air Vent Mounting with 
pedestal

APTTSE

Adapter for

TomTom

Start™ & Ease™

Do not place mount in or near an air bag deployment zone 
or where it will obstruct view of the road.

Compatible with:
• TomTom Start™ and TomTom Ease™

AP013 Disc
( 80 mm)

GN014-SBH
Windshield Or Dashboard 
Mounting with Swivel Ball 
Head Assembly

Step 1.

Step 2.

Find a safe location on the interior of the vehicle’s windshield 
to mount the pedestal.  Firmly push the suction base (A) 
against the windshield and fl ip the base lever down (B) to the 
locked position.  See diagram below. 

Adjust the angle of the pedestal arm by tightening the angle 
adjustment knob (C) at the base to the desired angle. 

Choose a suitable location for disc (and pedestal) installation.  
Do not place mount in or near an air bag deployment zone 
or where it will obstruct view of the road or hinder vehicle 
operation.

Clean the dashboard or console surface area thoroughly with 
the included alcohol pad.  Allow the area dry before applying 
the mounting disc.  

Remove the paper backing of the disc and place on the 
cleaned surface.  Press the top of the disc down fi rmly to allow 
the adhesive to stick to the surface.  Allow 24 hours for the 
adhesive to cure to the surface before applying any pressure. 

Step 1. 

Step 2. 

Step 3.

Place the suction cup of the pedestal fi rmly down on the center 
of the mounting disc and lower the securing lever. 

Step 4.

Push the pedestal suction cup (A) down onto the disk (D). Flip the 
lever (B) down to secure the suction cup. Adjust the angle of the 
arm by loosening the adjustment knob (C).

Step 6.

c

A

B

D

TomTom, Start and Ease are product names, trademarks, or registered trademarks 
of TomTom International b.v.  Arkon Resources, Inc. is not affi

  liated with TomTom 

International b.v. 

Attach the vent mounting clips (A) to the back of the pedestal 
(B) with the vent clips positioned with the fl at sides facing up.

Step 1.