Beko DRCS 76 S User Manual

16 - EN

Your machine will send out an audio 

warning when the programme comes to 

an end. If you do not want to hear this 

sound, you need to press the “Cancel 

Audio Warning” button.  The relevant LED 

will light up when this button is pressed 

and an audio warning will not be given 

when the programme comes to an end.

C

 You can select this function either 

before or after the programme starts. 

C

 Warning indicators may differ 

according to the model of your 

machine.

A warning LED will light up to remind filter 

cleaning after the programme finishes.

C

 If the filter cleaning warning LED 

lights up continuously, please refer to, 

“Solution suggestions for problems”.

A warning LED will light up at the end of 

the programme or when the tank is full 

with water. The machine stops operating 

when this warning LED lights up during 

a programme running.  To restart the 

machine, please drain the water in 

the water tank.  Press “Start/Pause/

Cancel” button to start the programme 

after you have emptied the water tank. 

The warning LED goes off and the 

programme resumes operating.

If you wish to dry your clothes at a later 

time, thanks to the time delay function, 

you can delay the program start up to 3 

hours, 6 hours or 9 hours.

1. Open the loading door and put the 

laundry in.

C

 Make sure that all air outlets are open, 

door filter is cleaned and the water 

tank is empty.

2. Set the drying program, temperature, 

spin speed and, if required, the 

auxiliary functions.

3. When the time programming button 

is pressed once, a 3 hour delay is 

selected and the relevant led lights. 

When the same button is pressed 

again, 6 hours; and if pressed once 

more, 9 hours delay will be selected. 

If the time programming button is 

pressed one more time, time delaying 

function will be cancelled. Set the time 

delay as you require.

4. Delayed operation of the selected 

program is started by pressing the 

"Start/Pause/Cancel" button after 

selecting the time delay. 

C

 Additional laundry may be loaded / 

taken out during the time delay period.

If you want to cancel the time delay 

countdown and start the program:

1. Press “Start/Pause/Cancel” button 

for about 4 seconds. The “:” in the 

middle of the screen will stop flashing. 

“Start/Pause/Cancel” light will go off 

and the remaining time on the screen 

disappears.

2. Press “Start/Pause/Cancel” button to 

start the program right away.

1. Press “Start/Pause/Cancel” button to 

start the programme.

2. “Start/Pause/Cancel” button will light 

up to indicate that the programme has 

started.

Progress of a running programme is 

shown through the programme follow-up 

indicator.

At the beginning of every programme 

step, the relevant indicator LED will light 

up and light of the completed step will 

turn off.

- Drying level will be illuminated during 

the whole drying process until the drying 

degree reaches “ready to iron”.

- Starts to illuminate when the drying 

degree reaches “ready to iron” step and 

remains illuminated until the next step.