Beko DRCS 76 S User Manual

21 - EN

Hot and humid air in the condenser is 

cooled with the cold air from the room. 

Thus, the humid air circulating in your 

machine is condensed and then pumped 

into the tank. 

C

 Clean the condenser after every 20 

drying cycles or once a month.

To clean the condenser;

1  If a drying process has been carried 

out, open the door of the machine and 

wait until it cools down.

2  Unlock the 4 condenser locks after 

opening the kick plate. 

3  Pull out the condenser.

4  Clean the condenser with pressurized 

water and wait until the water drains.

5  Replace the condenser with the side 

labeled “Top” facing upwards. Lock the 

4 condenser locks. Make sure that the 

red lock on the upper right corner is 

engaged securely.

6  Close the kick plate cover.

 Close properly and 

check the locking 

latchs?