Beko DRCS 76 S User Manual

7 - EN

•  Install your machine in environments 

which have no risk of freezing and in a 

stable and level position.

•  Do not place your machine on a long 

pile rug or on similar surfaces.

•  Operate your machine in a well 

ventilated, dust-free environment.

•  Do not block the air ducts in front of 

and under the machine with materials 

such as long pile rugs or kitchen unit 

plinths.

B  Make sure that your machine is not 

placed on the power cable.

B  Keep at least 3 cm from the edges of 

other furniture.

•  Leave at least 3 cm of space between 

the side and rear walls of the machine 

and the walls of the counter/cupboard 

when installing your machine under a 

counter or in a cupboard. Never use 

the tumble dryer without top plate. 

In order to ensure that your machine 

operates more silently and vibration-free, 

it must stand level and balanced on its 

feet.  Front feet of your machine can 

be adjusted. Balance the machine by 

adjusting the feet.

1.   Loosen the feet by hand.

2.   Adjust them until the machine stands 

level and firmly.

C  Do not use any tools to loosen the 

adjustable feet. Otherwise, they can be 

damaged.

C  Never unscrew the adjustable feet 

from their housings.

2 plastic pieces supplied together with 
the Operating Instructions prevent 
your machine from slipping on wet and 
slippery surfaces. To install these plastic 
parts:

1.   Tilt your machine to backwards.

2.   Fit the plastic parts to the front 

adjustable feet. Press on the plastic 

parts to fix them in their places.

3.   Check the balance of your machine 

again and readjust the adjustable feet if 

necessary.

Ventilation hose assures exhausting of the 

air from inside the machine.

Vented dryer has 1 air outlet.

Stainless sheet metal or aluminum pipes 

can be used instead of the hose. The 

diameter of the pipe to be used should 

be minimum 10 cm.

Maximum hose and pipe lengths are 

given in the table below.

Hose

Pipe

Maximum length

4 m

5 m

1 elbow 45°

-1.0 m

-0.3 m

1 elbow 90°

-1.8 m

-0.6 m

1 elbow 90° short

-2.7 m

1 wall passage

-2.0 m

-2.0 m

C  Each elbow and other passages 

should be subtracted from the above 

maximum length.

To connect a ventilation hose;

1.  Connect the air outlet hose to the 

hose spacer piece by turning it anti-

clockwise.

2.  Make the hose passages as shown 

below.