Bang & Olufsen BeoVision 9 User Manual

Expand your setup 

Information 

Your TV supports a wide range of additional equipment. You can even connect a 

projector or a home automation system to control room lights and curtains. 

Connect video recorders only to AV1 or AV2. 

While expanding your setup, the TV must be 
disconnected from the mains. 

Disconnect TV from mains 

Switch off TV 

Remove the cable cover to get access to the 
connection panel. 

Tilt main connection panel for-

ward 

To operate non-Bang & Olufsen products with 

Beo5, attach a Bang & Olufsen IR-transmitter to 
each product. See also pp. 48-49. 

Make the connections 

Select corresponding socket 

marked CTRL 

Always attach covers before you connect the 

TV to the mains. 

Connect TV to mains supply 

Attach all covers 

Switch on TV 

Press B to open the small door to 

sockets for temporary 

connections 

Release the two locks A and 

pull off cover 

Automatic selection of connected sources, when the TV is on and detects a signal. 
Activate the Timer recording option for a connected recorder. Available if you do not have the optional 

Bang & Olufsen hard disc recorder. Only available in the ‘AV1’ and ‘AV2’ menus, and can only be 
activated in one of these menus at any time. 
Equipment connected via an HDMI IN socket. If you have set the ‘HDMI EXPANDER’ in the 

‘CONNECTIONS’ menu to ‘YES’, the ‘HDMI-C’ option in the ‘AV’ menus is replaced with ‘HDMI-C1’, 
‘HDMI-C2’, ‘HDMI-C3’, and ‘HDMI-C4’. 

46