West Bend 41125 - Stand Mixer Owner's Manual
To prevent electrical shock, personal injury or property damage, read and
follow all instructions and warnings.
follow all instructions and warnings.
E
LECTRICITY
P
RECAUTIONS
• To protect against electric shock, do not immerse cord, plugs, or other electric
parts in water or other liquids.
• Do not operate any appliance with a damaged cord or plug.
• Do not operate when the appliance is not working properly or when it has been
• Do not operate when the appliance is not working properly or when it has been
damaged in any manner. For service information see warranty page.
• Do not use this appliance outdoors.
• Always switch appliance to OFF and unplug the appliance from outlet and allow
• Always switch appliance to OFF and unplug the appliance from outlet and allow
to cool before putting on or taking off parts and before cleaning.
• Avoid contacting moving parts. Keep hands, hair, clothing, spatulas and other
utensils away from beaters during operation to reduce the risk of injury to
persons, and/or damage to the mixer.
persons, and/or damage to the mixer.
• Remove beaters from mixer before washing.
• Do not leave appliance unattended while it is operating.
• Your appliance has a short cord as a safety precaution to avoid pulling, tripping
• Do not leave appliance unattended while it is operating.
• Your appliance has a short cord as a safety precaution to avoid pulling, tripping
or entanglement. Position the cord so that it does not hang over the edge of the
counter, table or other areas or touch hot surfaces.
counter, table or other areas or touch hot surfaces.
• While use of an extension cord is not recommended, if you must use one, make
sure the cord has the same or higher wattage as the appliance (wattage is
stamped on the underside of the mixer head). To avoid pulling, tripping or
entanglement, position the extension cord so that it does not hang over the edge
of the counter, table or other areas or touch hot surfaces.
stamped on the underside of the mixer head). To avoid pulling, tripping or
entanglement, position the extension cord so that it does not hang over the edge
of the counter, table or other areas or touch hot surfaces.
• Use an electrical outlet that accommodates the polarized plug on the appliance.
On a polarized plug, one blade of the plug is wider than the other. If the plug
does not fit fully into the outlet or extension cord, reverse the plug. If the plug still
does not fit fully, contact a qualified electrician. Do not alter the plug.
does not fit fully into the outlet or extension cord, reverse the plug. If the plug still
does not fit fully, contact a qualified electrician. Do not alter the plug.
• Do not use an outlet or extension cord if the plug fits loosely or if the outlet or
extension cord feels hot.
• Keep the cord away from moving parts of the appliance during operation.
SAVE THESE INSTRUCTIONS
3