White Rodgers 1F95EZ-0671 Emerson Blue Easy Reader Thermostat Operating Guide

This feature will override the program temperature 
setting for a two hour period. Press 

 or 

 buttons 

to adjust the temperature. The display will show “Hold
Temp” to the left of the desired temperature. To cancel 
the temporary setting and return to the program, 
press Run. Example: If you turn up the heat during the 
morning program, it will be automatically lowered later, 
when the temporary hold period ends.

The Permanent Temperature Hold feature bypasses 
the program and allows you to adjust the temperature 
manually as needed. The temperature you set in Hold 
will be maintained indefi nitely. Press 

 or 

 buttons 

to adjust the temperature. The display will show “Hold
Temp” to the left of the desired temperature. Press the 
Hold button to maintain the new temperature. 



Press Heat or A/C button to turn your system On. 
Press Off to turn Heating and A/C Off. Fan will turn 
Off if it is On.



Press Run or Run Sched to begin running 
thermostat program 



Press either the 

 or 

 buttons to change the 

desired room temperature “setting”.



Press the Fan button to select the desired fan 
operation. 

If your heating or A/C system is a heat pump, the 
system automatically activates Auxiliary Heating when 
the outside temperature is too cold for the heat pump 
to effi ciently heat the home. You can manually activate 
the auxiliary heating by pressing and holding the Heat
button until Aux

 changes to Aux. To turn the manual 

auxiliary off press the Heat button again.

USING YOUR THERMOSTAT – PROGRAMMABLE MODE