Honeywell 88037 User Manual

The refrigerator has been built with the door 

hinges on the right. 
If you wish to change the opening direction, 

follow these instructions:
NOTE: UNPLUG THE REFRIGERATOR FROM 

CHANGING THE REVERSIBLE DOOR. 
1. Empty everything in the refrigerator, including 

shelves and food.
2. First remove the upper and lower hinge covers 

on the left and right side by hand. 
3. Remove the six screws (using a Phillips 

screwdriver) that are on the top and bottom of 

the cabinet. 

4. Remove the upper and lower hinges and lift 

the door and place it on a padded surface to 

prevent scratches. 

4A. All parts removed must be 

retained to reinstall the door.

5. Transfer the hinges and screws to the left, 

place the upper hinge pin into the upper hole of 

the door, then tighten the three screws on the 

top, then the other three on the bottom. Put the 

flat hinge cover over the hinge holes on the left. 
6. Open the door carefully and slowly to make 

sure the door is correctly attached and closing 

properly.