Whirlpool WET3300XQ Quick Setup Guide

Drain system can be installed using a floor drain, wall standpipe,  

floor standpipe, or laundry tub. Select method you need.

Minimum diameter for a standpipe drain: 2" (51 mm). Minimum 

carry-away capacity: 17 gal. (64 L) per minute. Top of standpipe 

must be at least 39" (990 mm) high; install no higher than 96"  

(2.4 m) from bottom of washer/dryer. If you must install higher 

than 96" (2.4 m), you will need a sump pump system.

See requirements for floor standpipe drain system.

Floor drain system requires a Siphon Break Kit (Part Number 

285834), 2 Connector Kits (Part Number 285385), and an  

Extension Drain Hose (Part Number 285863) that may be  

purchased separately. To order, please see toll-free phone  

numbers in your Use and Care Guide. Minimum siphon break: 

28" (710 mm) from bottom of washer/dryer. (Additional hoses 

may be needed.)

Minimum capacity: 20 gal. (76 L). Top of laundry tub must be  

at least 39" (990 mm) above floor; install no higher than 96"  

(2.4 m) from bottom of washer/dryer. 
IMPORTANT: To avoid siphoning, no more than 4.5" (114 mm) 

of drain hose should be inside standpipe or below the top of 

wash tub. Secure drain hose with shipping strap.