Hasselblad 503 Series 10026 User Manual

Remove the two remaining screws (820015) holding the
focusing screen frame to the right hand wall and lift the
frame off.

Remove (or cut) the foam plastic pad (22582) to get
access to the three screws (820014). Remove the right
hand wall.

Remove the damping ring (22287) by first removing
screw (822605) and washer (810836). Put the screw
(822605) back, to keep the spring (30384) in place.
Remove the screw (821631), washer (810532) and gear
wheel (13112). Beneath the gear wheel remove washer
(810826). Remove the mirror spring (814827).
Fig. 6.

Remove the mirror actuating lever (13362) from the
rear of the right hand side wall together with the lens
lock (13280).

Remove the following parts shown in Fig. 7.

1. Spring (814826)
2. Screw (821032)
3. Spring (816914)
4. S-arm (21167) and hub (840701)
5. Release arm (13357) including push rod (22369)
6. Stop lever (22769), clip (817119) and spring
    (816752)

Remove the remaining six screws, the stop angle
(13432) and adjustable pawl (13170).
Separate the mechanism plate from the right hand wall.

3

6

1

4

2

5

13112

822605

22287

821631

814827