Westinghouse WP2700 Owner's Manual
24
OPERATION
OTE:
N
The pump is equipped a with a thermo valve
(see Figure 24 and Figure 25). If the pump
is run for an extended period of time without
water fl owing through it, it could overheat. If
the pump gets to a certain temperature, the
thermo valve will open and discharge warm
water out the valve to allow cold water in to
cool the pump.
(see Figure 24 and Figure 25). If the pump
is run for an extended period of time without
water fl owing through it, it could overheat. If
the pump gets to a certain temperature, the
thermo valve will open and discharge warm
water out the valve to allow cold water in to
cool the pump.
3. Point the thermo valve away from the work area
you are washing to avoid being sprayed with warm
water.
water.
Figure 24 – Pump Thermo Valve – WP2700
Figure 25 – Pump Thermo Valve – WP3000
4. WP2700 – Move the engine ON/OFF switch to the
ON (I) position (see Figure 26). Move the choke
lever to the choke position.
lever to the choke position.
1
2
3
Figure 26 – Engine ON/OFF Switch – WP2700
1 - Engine ON/OFF
Switch
2 - Choke Lever
3 - Starter Handle
5. WP3000 – Move the engine ON/OFF switch to the
ON position (I) (see Figure 27).
Figure 27 – Engine ON/OFF Switch – WP3000