ICOM DS-100 User Manual
i
FOREWORD
Thank you for purchasing this Icom product. The DS-100
DSC
CONTROLLER
is designed and built with Icom’s superior tech-
nology and craftsmanship. With proper care this product should
provide you with years of trouble-free operation.
provide you with years of trouble-free operation.
IMPORTANT
READ ALL INSTRUCTIONS
carefully and com-
pletely before using the controller.
SAVE THIS INSTRUCTION MANUAL—
This in-
struction manual contains important operating instructions for
the DS-100.
the DS-100.
EXPLICIT DEFINITIONS
FEATURES
☞
Class D DSC terminal
The DS-100
VHF DSC CONTROLLER
is designed as a
‘Class D DSC terminal unit’ for the IC-M501EURO
VHF
MARINE TRANSCEIVER
.
☞
Self ID indication
The DS-100 does not function when there is no ID is pro-
grammed. Therefore, the ID code should be checked in
the Set-up menu.
grammed. Therefore, the ID code should be checked in
the Set-up menu.
INSTALLATION NOTES
In all cases, any possible risk of injury depends on the trans-
mitter being activated for long periods. (actual recommenda-
tion limits are specified as an average of 6 minutes) Normally
the transmitter is not active for long periods of time. Some
radio licences will require that a timer circuit automatically turn
the transmitter off after 1 – 2 minutes etc.
mitter being activated for long periods. (actual recommenda-
tion limits are specified as an average of 6 minutes) Normally
the transmitter is not active for long periods of time. Some
radio licences will require that a timer circuit automatically turn
the transmitter off after 1 – 2 minutes etc.
WORD
DEFINITION
R
WARNING
Personal injury, fire hazard or electric
shock may occur.
shock may occur.
CAUTION
Equipment damage may occur.
NOTE
If disregarded, inconvenience only. No risk
of personal injury, fire or electric shock.
of personal injury, fire or electric shock.