Brother ZE-8580 Owner's Manual
BE-0901E-AC-PC• BE-1201B-AC-PC
5-19
Chapter 5 Editing Embroidery Data
Margin setting with [Auto setting] selected
The number is set automatically so as the number of repetitions to be the maximum within the sewing
The number is set automatically so as the number of repetitions to be the maximum within the sewing
area.
!
!
When [Spacing], [Direction], and [Datum] are pre-selected before [Auto setting] is selected, the
setting is performed according to pre-selections.
!
[Margin] can be set after [Auto setting] is selected and the margin size you can set is 5 ~ 100mm
(0.2 ~ 4.00’ in inch) around the sewing area.
Margin setting is performed as follows:
1. Select [Auto setting] and click [Margin].
W1034Q
2. Set the vertical and horizontal margin for sewing area.
W1035Q
3. Click [OK].
4. Click [OK].
Numbers can be directly input.
Numbers are up and down if clicked.
Repetition number in vertical direction.
Repetition number in horizontal direction.