Manualsbrain.com
  1. Manuals
  2. Brands
  3. Brother
  4. XL-3030
  5. Owner's Manual

Brother XL-3030 Owner's Manual

Download
Page of 324
BEFORE EMBROIDERING
G
ettin
g R
ea
d
y
Basic operations B-61
B
1
Using the Embroidery Foot “W+” 
with LED Pointer
By plugging in the connector on the back of your 
machine, the embroidering needle drop point will 
be indicated on the fabric, allowing you to 
accurately position the pattern.
■ Attaching the Embroidery Foot 
“W+” with LED Pointer
a
Press the “Needle Position” button to raise 
the needle. 
b
Press .
→ The entire screen becomes white, and all keys and 
operation buttons are locked.
c
Raise the presser foot lever.
d
Push the black button on the presser foot 
holder and remove the presser foot. 
a Black button
b Presser foot holder
→ Remove the presser foot from the presser foot 
holder. 
e
Use the included screwdriver to loosen the 
screw of the presser foot holder, then 
remove the presser foot holder. 
a Screwdriver
b Presser foot holder
c Presser foot holder screw
→ Remove the presser foot holder.
f
Position the embroidery foot “W+” with 
LED pointer on the presser foot bar by 
aligning the notch of the presser foot to the 
large screw.
Side view
 CAUTION
• When attaching a presser foot, always press 
 on the screen. You may accidentally 
press the “Start/Stop” button and possibly 
cause injury. 
• Be sure to use embroidery foot when doing 
embroidery. Using another presser foot may 
cause the needle to strike the presser foot, 
causing the needle to bend or break and 
possibly cause injury.
 CAUTION
• When attaching a presser foot, always press 
 on the screen. You may accidentally 
press the “Start/Stop” button and possibly 
cause injury.