Manualsbrain.com
  1. Manuals
  2. Brands
  3. Brother
  4. XL-3027
  5. Owner's Manual

Brother XL-3027 Owner's Manual

Download
Page of 224
CHANGING THE PRESSER FOOT
G
ettin
g R
ea
d
y
Basic operations B-49
B
1
Removing the Presser Foot
a
Press the “Needle Position” button to raise 
the needle.
b
Press .
*
If the message “OK to automatically lower the 
presser foot? ” appears on the LCD screen, press OK 
to continue.
→ The entire screen becomes white, and all keys and 
operation buttons are locked.
c
Raise the presser foot lever.
d
Press the black button on the presser foot 
holder and remove the presser foot.
a Black button
b Presser foot holder
Attaching the Presser Foot
a
Place the new presser foot under the 
holder, aligning the foot pin with the notch 
in the holder. Lower the presser foot lever 
so that the presser foot pin snaps into the 
notch in the holder. 
b
Press 
 to unlock all keys and 
buttons.
c
Raise the presser foot lever.
Attaching the Presser Foot with 
the Included Adapter
You can attach the free motion echo quilting foot 
“E” and the optional walking foot, the optional free 
motion quilting foot and so on, using the included 
adapter and small screw.
The following procedure shows how to attach the 
free motion echo quilting foot “E” as an example.
CHANGING THE PRESSER FOOT
 CAUTION
• Always press 
 on the screen before changing the presser foot. If 
 is not pressed and the 
“Start/Stop” button or another button is pressed, the machine will start and may cause injury.
• Always use the correct presser foot for the selected stitch pattern. If the wrong presser foot is used, the 
needle may strike the presser foot and bend or break, and may cause injury.
• Only use presser feet made for this machine. Using other presser feet may lead to accident or injury.
b
a
 CAUTION
• Make sure that the presser foot is installed in 
the correct direction, otherwise the needle 
may strike the presser foot, breaking the 
needle and causing injuries.
a Notch
b Pinl